Pendant lighting for industrial facilities designated by the letter C according to the method of installation and the letter P on your assignment. Depending on the specifics of the room use different types of lighting equipment.
Built-in lamp, the light source is also indicated by a letter depending on its type. Incandescent General purpose N reflex and diffuse lighting With luminous linear device figure type FEL mercury content of a type DRL xenon tube are denoted By the bactericidal elements are marked with a letter B.
The fittings depends on the method of distribution of the flow of light is different in these types of
Elements of the design of suspended equipment for lighting large areas is the case in metal or plastic execution security glass or wire mesh is protected from mechanical damage. The devices can be supplemented with reflectors and optical refraction.
Device reflection light flux used to illuminate a larger area with uniform distribution of rays of high degree of brightness. The height of the lamp does not affect the degree of ambient light. And the design features of the light fixture to prevent glare.
The direction of the beam in hanging device allows to increase the degree of brightness. This maintains optimal contrast of shades and colors of the objects in the room.
Protective caps with a sealed layer protecting the reflective elements and all fittings against the ingress of dust debris.
If the room is characterized by high humidity that is installed luminaire type dogs. Between the built-in reflector and protective cap be sure to install the gasket. This item will exclude the ingress of condensate will provide the necessary sealing of the valve device.
For the production of raw dusty conditions use illuminators of the type PNP. These devices have a fully sealed body and a system of efficient of retro-reflection. Two built-in lamp 100 watts will provide sufficient visibility in difficult working conditions.
In the case of operating conditions with a level of humidity higher than 75% and the presence of enough dust production set industrial luminaires marking NSPS. They include a sealed enclosure is fully protected against the penetration of moisture into the device. The latter condition is ensured by a rubber gasket between the base and the cap. The wires to the valve are fed through the packing protection.
If the working environment is characterized by a high content of chemicals and dust hanging from the lamp must have a designation of PPD. This category of lamps is distinguished by improved fire protection properties, resistance to strong shock waves.
On poultry farms, and such productions mounted lighting fixtures with fluorescent fixtures. Facilities construction industry, illuminated by the lamps of the type PNP PSC SNPS PPD.
This modern equipment is equipped with lamps with mercury or sodium filled. The power of the lamp up to 400 watts. Are characterized by a high degree of illumination long service life. Luminous efficiency in such devices increased 5-fold.
Halogen bulbs are used in hanging industrial lamps of type GSP is designed for ceiling height up to 6 m. High degree of color and shockproof protection case made these instruments popular in industrial sector.
Experts recommend to mount on the production of suspended structures with halogen lamps with infrared coating. In this case, the amount of consumption of electric energy reduced by 45%. And the service life of these lamps suspended in 2 times more than their competitors. These conditions will bring significant savings to the budget of the enterprise.
Save as PDF
Save as image