No event is complete without the appropriate sound and lighting. This is perhaps one of the most effective ways to create a suitable atmosphere. But first of all lighting and sound equipment provides the necessary conditions for the work of the actors on the stage. It is very important that they appeared before the audience in the right light.
But the lighting equipment must still be operated without errors otherwise, any event can be ruined. The field of application of lighting in this direction varied. They are used in the organization of lighting of the clubs stage performances concerts entertainment events including those that take place outdoors.
In accordance with the accepted type of the object is determined by the required lighting equipment. For example, for the stage the best option is to floodlight and used different types of
<-- meta slider -->
Installation of equipment of the last named group is most often appropriate when preparing for parties discos concerts. According to this parameter as the functionality can be shared by all the lighting devices into three categories of point light effects and blurry light.
In addition, there is the separation of equipment into two major groups, those that support the DMX standard defines the method of digital data transmission between control unit and light technology and those that do not support it.
At the organization of the lighting system of clubs it is advisable to use these types of equipment
Often in addition to light engineering and sound design will involve special effects generators create the semblance of a smokescreen of fire foam of soap bubbles, and more.
Regardless of which sources of light are used led or lamp hardware counterparts in the organization of the lighting system plays a role in the first place the type of object. For example, in the case of the scene right to provide coverage of actors and scenery just in front. This activates the front lights. It is important that he was close to natural.
Installation of the lighting system are outside the operating site of the actors and the audience. The light is directed only onto the stage and the proscenium. The audience lighting should not be so as not to blind them. Front lighting includes
If you want the installation of the lighting system of the club for each zone apply to certain types of equipment allows you to create different effects. Missing equipment that is operated infrequently, you can rent. The dance floor is illuminated evenly for this installation of light sources is performed along the entire length of the site.
Workstation DJ is highlighted effectively. For recreation, you should choose the sources of light creates a pleasant atmosphere. The best solution is the installation of spotlights. Bar illuminated projection and decorative devices.
The tripod is one of the possible ways to make installation of equipment on a certain height. The light heads have their own mounts allowing them to rotate freely. But tripod is used more rafters and a suspension through which the lighting device can be suspended. The rafters represent the two supporting mounts with the valve between them and the stand is similar to a tripod. Installation usually requires the use of different methods of fastening.
In any case, it is recommended to get a bag to hold the extra batteries bulb clips and mounts since there is always the likelihood that the gimbal or tripod will fail.
Cable size is determined by the capacity of the device. Installation requires the use of extension cords due to which installation of equipment is performed without reference to the power source. For devices supporting the standard will need additional DMX DMX cable. Communication of this type is characterized by different connectors 3 - and 5-pin. This should be considered before making the installation.
Tripod lighting equipment of lesser capacity should be installed as close as possible to the object. Management of all appliances is carried out by the controller. The installation of this item must be performed in accordance with this condition the last device in-line connected instruments equipped with a terminator.
So the installation was organized as efficiently as possible should wisely combine the ambient and point light. The color scheme uses different starting and ending with a contrasting harmony.
Therefore, when the organization of light installations using different light sources. They can be fixed on a tripod rafters suspension. The installation location is selected based on the characteristics of the room. In the case when do not exist the necessary equipment can be rented or rental, in any organization which is engaged in selling or installing lighting equipment.
Save as PDF
Save as image