And it is possible that in the pit even mounted a high-impact lamp in the garage or the car you can always find the usual Chinese portable flashlight, However, for modern garage such an approach is unacceptable.
Modern garage stored where not just machines but also every day people work where conducted routine maintenance and repair work, this is clearly not enough. Garage lighting should be bright enough to evenly cover the entire internal volume of the building.
This requirement provides maintenance and repair of vehicles with no problems. Along with General lighting separate areas of the garage to cover additional area such as a workbench. This so-called modular scheme of lighting which allows you to highlight as a common space and a specific working area.
As the cost of electricity only increases the need to strive to reduce the cost of lighting but not at the expense of quality. The garage typically has no direct sunlight and artificial lighting is required constantly so it makes sense to use energy-saving lamps as well as the need to provide a source of emergency lighting on failure of power.
The parameters of illumination of the working area are governed by the interstate standard GOST ISO 8995-2002. Remember that the quality of the lighting of the working area depends on your eyesight and vision of your employees. So be greedy when choosing lighting is not necessary.
According to claim 6.2 GOST ISO 8995-2002 when creating a lighting installation needs to consider that due to dust loss of brightness over time, some types of lamps room lighting will be reduced so first do the groundwork for brightness ie better project is based on the brightness of the lighting required above.
According to the method of mounting fixtures for the garage are divided into
Incandescent bulbs are the cheapest bulbs are Characterized by relatively low lifetime uneven brightness and power consumption. However, are today the cheapest on the market. In modern projects is not recommended
Gas-filled lamps, fluorescent lamps These lamps have a significantly longer service life in 2-3 times reduced power consumption compared to conventional lamps, however, have several disadvantages. So light output is reduced by 50% towards the end of the lamp life.
Additionally, the lamps begin to flicker as a result, you may experience the stroboscopic effect in which the moving object appears stationary. It's easy on the eyes and is really dangerous. Therefore, these ceiling lamps are considered obsolete. Contain mercury.
Economical gas-filled lamps These lamps are considered as replacements for the ordinary bulbs with the filament about 5 times reduced power consumption. However, they are also subject to loss of emission and the brightness of the lamp decreases with time. Steadily working about 3 years. It should be selected where once worked a conventional lamp.
Ultra-low-cost led lamps are the Most promising type of lamp in terms of energy savings. LEDs industrial performance have a service life of 30 thousand hours which is more than 3 times the lifespan of fluorescent lamps. Available in different designs the most common socket type E27G13. Recommend to choose led light bulb warm white.
For basic lighting we recommend to choose the industrial model of the type of Passage M-4042 IP65 is a modern analogue series watertight fluorescent lamps 1200 mm with degree of protection IP65. The lamp is designed for use in dusty and wet areas such as warehouses hangars garages shop car washing pools.
The lamp can be mounted directly on the ceiling to hang it on a rope or a steel chain to attach on the wall horizontally or vertically.
In a case of this ceiling lamp is made of high quality plastic and dissipate from the special lighting of polystyrene. Such materials are resistant to aggressive environment of the medium degree and to moderate mechanical stress. Through the use of led lamps, the lamp does not have the disadvantages inherent in fluorescent lamps. Power consumption, each bulb is 40 watts.
For the workbench In the local area of the workbench, it is desirable to use directional lighting use lamps with adjustable illumination angle fixed on the wall over the entire length of the bench. For protection against mechanical damage should you choose high impact or put the lamp in a protective cover.
To work with auto pit lifts In the pit it is necessary to provide a relatively comfortable mechanics work without glare. Therefore, you should use lights with lighting angle of the lamp 75°. Length of lanesville selected according to your requirements. The power of the lamp is better to choose a 24V it will provide an acceptable level of security for mechanics.
You need to provide a sufficiently bright lighting over the entire length of the lamp without distorting colors. A wide temperature range. Operating temperature -10 to +40 degrees Celsius. The enclosure must be durable pyleonephritis ideally with degree of protection IP67. For example, these parameters satisfy led lamp series Light Line with a length of 163 meters and a capacity of only 14W.
For warehouse lighting warehouse is suitable for almost any industrial lamp universal you can choose from those that are used for the main lighting. How brightly to illuminate the warehouse for You to decide but don't forget about GOST.
For emergency lighting For emergency light is convenient to use led strip. The ribbon is a set of planar SMD led with a particular emission spectrum. It is recommended to choose a ribbon with warm white light color. For example, a tape with 60 LEDs consumes only 4.8 W and can be connected to DC 12V voltage i.e., to the normal car battery.
The motion sensor. Application. In the garage where no permanent lighting is convenient to apply infrared motion sensor such as the light area in front of garage doors. The motion sensor can be configured at the operation time from several seconds to several minutes is sufficient. In the garage often have human hands and is uncomfortable look for a switch so the motion sensor helps to switch on the lights and turn it off.
Alternatively, you can install the sensor with the siren in the garage that will scare intruders and possibly save the property. Correctly and in the right place mounted motion sensor will reduce energy costs up to 50%.
From the above it follows that the garages which are already in operation at remotesnap of lamps and lighting fixtures it is better to use only the new led options especially if they'll fit on a power shape and the size of the cap. Electricity is continuously going up and it will be the right approach.
A promising direction of accommodation on the garage roof of solar panels and switching to full or partial energy independence especially in some parts of the work. Please note that the cost of solar panels is declining.
Save as PDF
Save as image